The Kelly Kettle® is easy to use.

To start with, remove the fire base from the bottom of the kettle and place the base on level ground – flat side down.

1. Remove protective cork from kettle and fill kettle with water. Do not replace the cork - the water spout must be free from ALL obstructions when the kettle is in use. (Note: If you do not need to carry water in the kettle, we recommend that the Cork be removed entirely from the kettle as this will ensure that the kettle is not misused)
2. Fill the base with combustible material such as newspaper, dry grass or very small tinder. Then place the kettle securely on the base.
3. Light fire through the hole(s) in side of the base and face the hole(s) into the wind for extra draught.
4. Insert additional fuel through the chimney (use small twigs or Pine cones for best results).
5. When the water boils, hold the handle at a 90° angle to the body of the Kettle – then lift Kettle clear of the base. Use handle and chain for pouring. If additional boiling water is required, simply refill the kettle, place it back on the fire base and refuel the chimney again!

• Always remove the cork before lighting the kettle. The cork is only to be used for transporting cold water.
• Boiling the kettle with ANY obstruction in the water spout can result in a serious burn for the user or others in close proximity.
• Never hold the handle above the chimney when the kettle is lit as it can result in a burn for the user.
• Always keep children away from the kettle when in use.
• Use surplus water to extinguish fire.

Download Instruction leaflet here